Current Opportunities...

Complete used Edible Oil Refinery (All equipment from raw oil … to refined oil) for sale. 
Capacity: The capacity of 150 tpd is for 24 hours, 3 shifts of 8 hours.

There is an opportunity for expansion on site in case if is needed.

Type of refining: Physical refining

Used Complete edible oil refinery (production facility) with capacity 150 tons per day of refined sunflower oil, with filling, packing and storage on site.
Built in 2008 with capacity 150 tons per day of refined sunflower oil.

Business Overview

The business was established in 1995. Current production facility consists of equipment made by GEA Westfalia, Harburg Freudenberger and other leading European OEMs for oil refining.
The automated production process provides optimized treatment of the oil, removing unwanted ingredients whilst preserving the nutritive values of the product. This type of refining technology provides edible oil that has a natural source of tocopherol (natural vitamin E) and great stability.

Total production facility area is 21,027m2, which includes 18,371m2 for production facilities, 1862m2 of warehousing and 839m2 for auxiliary premises, administrative building and restaurant. Packaging of both sunflower and olive oil products is into PET bottles, apart from extra virgin olive oil, which is filled into glass bottles.

– Revenue is split between wholesale and retail channels with approximately 70% coming from retail.

– Majority of revenue from exported sales comes from 1-litre bottles of sunflower oil sold to neigh borough countries.

Includes the following:
– Neutralisation & Winterisation (GEA-Westfalia);
– Bleaching & Deodorisation (Hamburg Freudenberger);
– With filling, packing and storage on site.

Business sale includes the following production facilities located on 21,000 m2 of land:

DESCRIPTION

Main sections are described below.
Refinery built in 2008 with capacity 150 tons/day.

Consist of the following equipment for:

Neutralisation: Make: GEA-Westfalia

Winterisation:
Make: GEA-Westfalia
Bleaching:
Make: Harburg Freudenberger

Deodorisation:
Make: Harburg Freudenberger

– Filling & packaging plant with capacity 8,800 bottles/hour of 1 litre bottles from equipment made in 2006.
– Includes PET blow moulder with capacity 8,800 bottles/hour; Monobloc for filling and sealing PET bottles with press-on caps; Automatic label machine with capacity 10,000 labels/hour; Bottle packing machine; Palletiser with capacity 15 pallets/hour.
– Also includes semi automatic packing machine made in Bulgaria 2015 for oil into cylinders sized 3, 4.75, 5 and 10 litres with capacity 3000 litres/hour.
– Storage available across (6) tanks for: Raw oil 1760 m3 + 1200 m3; Refined oil 750 m3 + 630 m3; Filtered oil 450 m3 + 100 m3.
– Warehouse for finished products size: 600 m2.
– Warehouse for raw materials size: 200 m2.
– Associated facilities including boiler room, plant for soft water preparation, compressors, coolers, area for splitting soaps and distillation of fatty acid, warehouse for by-products (160 m3 fatty acid, 100 m3 vegetable wax, 100 m3 used filtered oil, 200 m3 sludge), 30 m3 / hour wastewater treatment plant.

Complete used Edible Oil Refinery (All equipment from raw oil … to refined oil) for sale. 
Capacity: The capacity of 150 tpd is for 24 hours, 3 shifts of 8 hours.

There is an opportunity for expansion on site in case if is needed.

Type of refining: Physical refining

Used Complete edible oil refinery (production facility) with capacity 150 tons per day of refined sunflower oil, with filling, packing and storage on site.
Built in 2008 with capacity 150 tons per day of refined sunflower oil.

Business Overview

The business was established in 1995. Current production facility consists of equipment made by GEA Westfalia, Harburg Freudenberger and other leading European OEMs for oil refining.
The automated production process provides optimized treatment of the oil, removing unwanted ingredients whilst preserving the nutritive values of the product. This type of refining technology provides edible oil that has a natural source of tocopherol (natural vitamin E) and great stability.

Total production facility area is 21,027m2, which includes 18,371m2 for production facilities, 1862m2 of warehousing and 839m2 for auxiliary premises, administrative building and restaurant. Packaging of both sunflower and olive oil products is into PET bottles, apart from extra virgin olive oil, which is filled into glass bottles.

– Revenue is split between wholesale and retail channels with approximately 70% coming from retail.

– Majority of revenue from exported sales comes from 1-litre bottles of sunflower oil sold to neigh borough countries.

Includes the following:
– Neutralisation & Winterisation (GEA-Westfalia);
– Bleaching & Deodorisation (Hamburg Freudenberger);
– With filling, packing and storage on site.

Business sale includes the following production facilities located on 21,000 m2 of land:

DESCRIPTION

Main sections are described below.
Refinery built in 2008 with capacity 150 tons/day.

Consist of the following equipment for:

Neutralisation: Make: GEA-Westfalia

Winterisation:
Make: GEA-Westfalia
Bleaching:
Make: Harburg Freudenberger

Deodorisation:
Make: Harburg Freudenberger

– Filling & packaging plant with capacity 8,800 bottles/hour of 1 litre bottles from equipment made in 2006.
– Includes PET blow moulder with capacity 8,800 bottles/hour; Monobloc for filling and sealing PET bottles with press-on caps; Automatic label machine with capacity 10,000 labels/hour; Bottle packing machine; Palletiser with capacity 15 pallets/hour.
– Also includes semi automatic packing machine made in Bulgaria 2015 for oil into cylinders sized 3, 4.75, 5 and 10 litres with capacity 3000 litres/hour.
– Storage available across (6) tanks for: Raw oil 1760 m3 + 1200 m3; Refined oil 750 m3 + 630 m3; Filtered oil 450 m3 + 100 m3.
– Warehouse for finished products size: 600 m2.
– Warehouse for raw materials size: 200 m2.
– Associated facilities including boiler room, plant for soft water preparation, compressors, coolers, area for splitting soaps and distillation of fatty acid, warehouse for by-products (160 m3 fatty acid, 100 m3 vegetable wax, 100 m3 used filtered oil, 200 m3 sludge), 30 m3 / hour wastewater treatment plant.

CO2 PRODUCTION PLANT
Capacity: 250 Kg/h
Manufacturer: WITTEMANN Co.- USA
Built in 2001

Working principle:

1 Boiler (diesel) -> Absorption tower ->
– Liquid back to boiler
– Gaz to purification -> compressor -> chiller -> condenser/receiver to turn gaz to liquid ->
storage tank for liquid CO2 (26 T)

Scope of supply : Co2 Plant on request including Layout

A SUPER E CO2 GAS GENERATOR consisting of :
A1 C02 REGENERATOR
A2 STRIPPER TOWER
A3 ABSORBER TOWER
A4 DIRECT CONTACT COOLER/S02 SCRUBBER
A5 SOLVENT SKID
A6 DC COOLER HEAT EXCHANGER PACKAGE
A7 CAUSTIC DAY TANK

B PURIFICATION TRAIN consisting of :
B1 SCRUBBER
B2 SCRUBBER
B3 DEODORIZER
B4 CARBON DUST FILLER
C C02 GAS COMPRESSOR
D C02 GAS DRYER and FILTERS
E R-22 LIQUEFYING SYSTEM – Lower End
F R-22 LIQUEFYlNG SYSTEM – Upper End w/ LC02 Transfer Station
G LIQUID CO2 STORAGE TANK (Capacity 26 Tons)
H CYLINDER FILLING UNIT
I SCALE
J WATER COOLING TOWER OUTDOOR
K WATER PUMP
L MOTOR CONTROL CENTER

CP CONTROL PANEL

M MOTOR

PID’s, pictures and layouts on request

Complete ETHYL ETHANOL PLANT WITH CAPACITY 75.000 l/day for sale

1. GENERAL INFORMATION ABOUT THE FACTORY:
   The plant was built in 2014 and is designed for the production of food-grade alcohol 96,3%, bioethanol, and a high protein product from distillery stillage known as DDGS (Distillers Dried Grains with Solubles). The production facility is fully equipped with all necessary technological equipment at every stage of production.
   The plant’s capacity for alcohol/bioethanol is 7500 decaliters per day and 52 tons per day of DDGS.
2. PRODUCTION PROCESS AND TECHNOLOGIES
   Detailed Description of the Ethanol Production Process:
   The production of alcohol/bioethanol consists of the following stages:
   1. Reception and preliminary processing of raw materials (corn, sorghum, wheat)
   2. Grain crushing
   3. Cooking (Hydro-enzymatic processing of raw materials)
   4. Periodic fermentation combined with saccharification using SSF (saccharification and fermentation) technology
   5. Rectification
   6. Dehydration (for bioethanol production)
3. Age and Condition of Equipment:
   The equipment is 10 years old and is in satisfactory condition.
   Production Capacity and Current Utilization Rates:
   The plant’s capacity for alcohol/bioethanol is 75.000 liters per day, and the capacity for producing DDGS is 52 tons per day.
4. OPERATIONAL PERFORMANCE
   Efficiency of Production Processes:
   The production facility uses modern technology, which allows for efficient resource utilization.
   Quality and Consistency of Products:
   The quality of the final products meets European quality standards. See Appendices 8 and 9.
5. ENERGY AND UTILITIES MANAGEMENT
   Energy Consumption and Efficiency
   Alcohol Production:
   – Gas: 3.1 m³/decaliter
   – Electricity: 3 kWh/decaliter
   DDGS Production:
   – Gas: 370 m³/ton
   – Electricity: 155 kWh/ton

Energy Sources (Electricity, Steam, etc.):
The plant is supplied by two independent electricity lines. It also has its own boiler house operating on natural gas, with a total steam capacity of 25 tons per hour.

Water Usage and Management:
The site has its own artesian wells and a lake with an area of 22 hectares.

Waste Management and Recycling Processes:
The distillery stillage is processed into DDGS feed.

6. TECHNOLOGY ASSESSMENT
   Evaluation of Current Technologies and Their Performance:
   Current technologies at the ethanol plant demonstrate high efficiency and stability in producing high-quality alcohol. Modern automated systems optimize the fermentation and distillation processes, ensuring consistent productivity and minimizing raw material losses. The positive outlook includes the potential to maintain high product quality standards and meet increasing market demand.

Opportunities for Technology Modernization or Improvement:
Investments in new control and process management systems, along with the adoption of innovative raw material processing and purification methods, can significantly enhance production efficiency and cost effectiveness.

Modernization prospects include reducing energy and material costs, increasing production volumes, and improving environmental performance.

Compatibility of Current Technologies with Future Trends:
Current technologies at the ethanol plant are ready for integration with new industry trends, such as digitalization, automation, and sustainable production.
Modern systems allow for easy adaptation to changes in market needs and regulatory requirements.

Used Alu CAN Manufacturing line for 2-piece alu beverage capacity 700/800 Cans Per Minute or 300 million cans/year – 2018

State-Of-The-Art CAN Production line for 2-piece alu beverage. Capacity 700/800 Cans Per Minute or annual capacity 305 million. EXPANDABLE to 600 million annual or 1700 – 1.800 Cans Per Minute !! In case want to run 1700/1800 cpm, you only need to buy new 4 bodymakers/trimmer, 4 Spay machines and dieset cupper.
Line is almost brand-new only ran 1-1/2 year only
All equipment is from 2017/2018 (installed and start-up was in 2018).
Can sizes 330ml 211/202 and 330ml sleek cans.
The entire system and machinery of the factory are imported from reputable suppliers in the world (STOLLE, BELVAC, BUSSE, …) and use the operating system of SIEMENS Group – Germany.
Control unit: Siemens 1500
Voltage/Frequency: 400V / 50 Hz
IMMEDIATELY AVAILABLE – SUBJECT UNSOLD !

UNUSED CEMENT FACTORY. RESTRICTIONS FOR RELOCATION ARE APPLYING.
DAILY CAPACITY IS 3.300 TPD OR 2500 Tons per day Clinker.
DELIVERY AND INSTALLATION ON TURN KEY POSSIBLE.
Documention available upon request.

North Sea Size Barge with UNUSED 120-personnel accommodation.

Vessel rebuilt 2021 (originally built 2010 at Nanjing Yonghua Shipyard)

Flag UK. Further details and specification available on request.

Ethanol Plant Distillery (for vodka production).

 Biodiesel Plant, 45,000 tonnes waste-based per annum. Production began 2005.

Cast Roll Products Manufacturing Plant for high quality cast rolls for Hot and Cold Strip Mills, medium to heavy section mills and plate mills up to 72 tonnes.

Products : Work Rolls for Hot Strip Finishing and Roughing Mills,

Work rolls for Plate Mills

Back up Rolls

Rolls for Cold Strip Mills

 Steel Production Plant immediately available, replacement cost in excess of

$2 billion dollars. Equipment will require extensive refurbishment but can be purchased “as is where is” for $ 120-150 million dollars.

Offers will be considered for major sections of this project.

 STS 4 Strand Billet Caster (YOM 2008) • Mannesmann Demag thin slab caster and hot strip mill (YOM 1998) • Nippon Steel Corporation 150T Ladle furnace (YOM 1998) • Rokop 5 Strand billet caster (YOM 1995) • UBE Industries 700,000 T/A hot skin pass mill (YOM 1998) • 2.5MT/A Pelletisation plant comprising: • 2x Vai Fuchs 80T electric arc furnace (YOM 2000) • 3x Inducotherm 30T induction furnace (YOM 2008) • 5x Sulzer 10.56MW gen sets (YOM 1994) • 6x Wartsila 10.51MW gen sets (YOM 1997) • 10x Overhead cranes by Hyundai, Samjung & Bando 12T – 110T